Skip to main content

Nothing Phone (1) (Spacewar)

info

Device Information​

  • Device: Nothing Phone (1)
  • Release Date: 12 July 2022
  • Chipset: Qualcomm Snapdragon™ 778G+ 5G (SM7325-AE)
  • RAM: 8 GB / 12 GB
  • Storage: 128 GB / 256 GB (UFS 3.1)
  • Battery: 4500 mAh
  • Display: 6.55 inches, OLED, 120Hz, HDR10+, 1080x2400 pixels
  • Rear Camera: 50MP (wide, Sony IMX766) + 50MP (ultrawide, Samsung JN1)
  • Front Camera: 16MP
  • Halcyon Version: Bloom
  • Maintainer: nyxalune
Get builds

Installation Guide​

caution

Make sure to backup your data before proceeding.

Installing Recovery​

  1. Enter bootloader mode by using a key combination Power + Vol Down.
  2. Connect your device to your PC via USB.
  3. Verify that your PC detects the device with fastboot devices.
  4. Flash the boot image onto your device using fastboot flash boot boot.img.
  5. Flash the vendor boot imahe onto your device using fastboot flash vendor_boot vendor_boot.img
  6. Reboot into recovery mode by typing fastboot reboot recovery in command line or navigate through bootloader and choose Reboot to recovery

Installing ROM​

  1. Download the latest release of Halcyon.
  2. Reboot into recovery mode.
  3. Perform a Format data.
  4. Return to the main menu.
  5. Select Apply update > Apply from ADB.
  6. Now you can start sideloading by this command:
adb sideload halcyon_Spacewar-xxxxx.zip

Troubleshooting​

If you encounter any issues during or after the installation, feel free to ask to our chat group for solutions to common problems.