Skip to main content

POCO M3 Pro/Redmi Note 10T/10 5G/11 SE (camellia) - Discontinued

info

Device Information​

  • Device: Poco M3 Pro/Redmi Note 10T/10 5G/11 SE
  • Release Date: April 28, 2021
  • Chipset: Mediatek Dimensity 700 5G
  • RAM: 4 GB / 6 GB / 8 GB
  • Storage: 64 GB / 128 GB
  • Battery: 5000 mAh
  • Display: 6.5 inches, IPS LCD, 90Hz, 1080 x 2400 pixels
  • Rear Camera: Triple 48 MP (wide) + 2 MP (macro) + 2 MP (depth)
  • Front Camera: 8 MP
  • Halcyon Version: Tithonia
  • Maintainer:
Get builds

Installation Guide​

caution Make sure to backup your data before proceeding. Make sure your either on MIUI 13+

Installing Recovery​

  1. Enter fastboot mode by using a key combination Power + Vol Down.
  2. Connect your device to your PC via USB.
  3. Verify that your PC detects the device with fastboot devices.
  4. Flash the recovery onto your device using fastboot flash boot boot.img.
  5. Reboot into recovery mode by holding Power + Vol Up.

Installing ROM​

  1. Download the latest release of Halcyon.
  2. Reboot into recovery mode.
  3. Perform a Format data.
  4. Return to the main menu.
  5. Select Apply update > Apply from ADB.
  6. Now you can start sideloading by this command:
adb sideload halcyon_begonia-xxxxx.zip

Troubleshooting​

If you encounter any issues during or after the installation, feel free to ask to our chat group for solutions to common problems.