Skip to main content

Redmi Note 13 Pro 5G / POCO X6 5G (garnet)

info

Device Information​

  • Device: Redmi Note 13 Pro 5G / POCO X6 5G
  • Release Date:
  • Chipset: Qualcomm SM7435 Snapdragon 7s Gen 2
  • RAM: 8 GB / 12 GB / 16 GB
  • Storage: 128 GB / 256 GB / 512 GB
  • Battery: 5100 mAh
  • Display: 6.67 inches, AMOLED, HDR10+, 120Hz, 1220x2712 pixels
  • Rear Camera: Triple 200/64 MP (main) + 8 MP (ultrawide) + 2 MP (telephoto macro)
  • Front Camera: 16 MP (wide)
  • Halcyon Version: Ursinia
  • Maintainer: Soni Dharma
Get builds

Installation Guide​

caution

Make sure to backup your data before proceeding.

Installing Recovery​

  1. Enter fastboot mode by using a key combination Power + Vol Down.
  2. Connect your device to your PC via USB.
  3. Verify that your PC detects the device with fastboot devices.
  4. Flash the boot image onto your device using fastboot flash boot recovery.img.
  5. Reboot into recovery mode by typing fastboot reboot recovery in command line or by holding Power + Vol Up.

Installing ROM​

  1. Download the latest release of Halcyon.
  2. Reboot into recovery mode.
  3. Perform a Format data.
  4. Return to the main menu.
  5. Select Apply update > Apply from ADB.
  6. Now you can start sideloading by this command:
adb sideload halcyon_garnet-xxxxx.zip

Troubleshooting​

If you encounter any issues during or after the installation, feel free to ask to our chat group for solutions to common problems.