Skip to main content

Samsung Galaxy A52 4G (a52q)

info

Device Information​

  • Device: Samsung Galaxy A52 4G
  • Release Date: March 17, 2021
  • Chipset: Qualcomm SM7125 Snapdragon 720G
  • RAM: 4GB / 6GB / 8GB
  • Storage: 128GB / 256GB
  • Battery: 4500 mAh
  • Display: 6.5 inches, Super AMOLED, 90hz, 1080x2400 pixels
  • Rear Camera: 64 MP (main) + 12 MP (ultrawide) + 5 MP (macro) + 5 MP (depth)
  • Front Camera: 32 MP (wide)
  • Halcyon Version: Bloom
  • Maintainer: frostg012
Get builds

Installation Guide​

caution

Make sure to backup your data before proceeding.

Fastboot package installation​

If you want to install using the Fastboot package, the complete installation guide is available here. Otherwise, you can follow the instructions below to flash via recovery using ADB sideload.

Installing Recovery​

  1. Pack the recovery image into a tar archive (using 7-Zip on Windows or the tar utility on Linux).
  2. Connect your device to your PC via USB while holding Vol Up + Vol Down. This will get you to download mode.
  3. Verify that your PC detects the device. Windows version of Odin has a graphical interface to show that. On Linux, this can be done with odin4 -l.
  4. Flash the archive you just created onto your device using the AP slot. Hold Power + Vol Up as soon as the device reboots to enter recovery.

Installing ROM​

  1. Download the latest release of Halcyon.
  2. Reboot into recovery mode.
  3. Perform a Format data.
  4. Return to the main menu.
  5. Select Apply update > Apply from ADB.
  6. Now you can start sideloading by this command:
adb sideload ota-halcyon_a52q-xxxxx.zip

Troubleshooting​

If you encounter any issues during or after the installation, feel free to ask to our chat group for solutions to common problems.