Skip to main content

Samsung Galaxy Note9 (crownlte)

info

Device Information​

  • Device: Samsung Galaxy Note9
  • Release Date: August 2018.
  • Chipset: Exynos 9810 (10 nm)
  • RAM: 4 GB / 6 GB
  • Storage: 128 GB / 512 GB UFS 2.1
  • Battery: 4000 mAh Li-Ion (non-removable)
  • Display: 6.4 in (162.56 mm) 2960x1440 (514 PPI) Super AMOLED
  • Rear Camera: 12MP (wide) / 12MP (telephoto)
  • Front Camera: 8MP (wide) / 2 MP (Dedicated Iris scanner)
  • Halcyon Version: Ursinia
  • Maintainer:
Get builds

Installation Guide​

caution

Make sure to backup your data before proceeding.

Requirements​

  1. A Windows/Linux/macOS PC with ADB and Heimdall installed

Installing Recovery​

  1. Enter Download mode by using a key combination Power + Vol Down + Bixby.
  2. Press Volume Up key.
  3. Connect your device to your PC via USB.
  4. Flash the recovery image onto your device.
heiimdall flash --RECOVERY recovery.img --no-reboot
  1. Reboot into recovery mode by holding Power + Vol Down and then Power + Vol Up + Bixby.

Installing ROM​

  1. Download the latest release of Halcyon.
  2. Reboot into recovery mode.
  3. Perform a Format data.
  4. Return to the main menu.
  5. Select Apply update > Apply from ADB.
  6. Now you can start sideloading by this command:
adb sideload halcyon_crownlte-xxxxx.zip

Troubleshooting​

If you encounter any issues during or after the installation, feel free to ask to our chat group for solutions to common problems.