Skip to main content

Redmi Note 14 5G / 14 SE / POCO M7 Pro 5G (beryl)

info

Device Information​

  • Device: Redmi Note 14 5G / 14 SE / POCO M7 Pro 5G
  • Other codenames: citrine
  • Release Date: 2024, September 26
  • Chipset: Mediatek Dimensity 7025 Ultra
  • RAM: 6GB / 8GB / 12GB
  • Storage: 128GB / 256GB / 512GB
  • Battery: 5110 mAh
  • Display: 6.67 inches, AMOLED, HDR10+, 120Hz, 1080x2400 pixels
  • Rear Camera: 108 MP (wide Global) / 64 MP (wide India, CN, & POCO) + 8 MP (ultrawide (non-POCO & non-CN)) + 2 MP (macro)
  • Front Camera: 20 MP (wide non-CN) / 16MP (wide CN)
  • Halcyon Version: Bloom
  • Maintainer: naokoshoto
Get builds

Installation Guide​

caution

Make sure to backup your data before proceeding.

Fastboot package installation​

If you want to install using the Fastboot package, the complete installation guide is available here. Otherwise, you can follow the instructions below to flash via recovery using ADB sideload.

Installing Recovery​

  1. Enter fastboot mode by using a key combination Power + Vol Down.
  2. Connect your device to your PC via USB.
  3. Verify that your PC detects the device with fastboot devices.
  4. Flash the recovery image onto your device using fastboot flash vendor_boot vendor_boot.img.
  5. Reboot into recovery mode by typing fastboot reboot in command line and then hold Power + Vol Up to boot to recovery.

Installing ROM​

  1. Download the latest release of Halcyon.
  2. Reboot into recovery mode.
  3. Perform a Format data.
  4. Return to the main menu.
  5. Select Apply update > Apply from ADB.
  6. Now you can start sideloading by this command:
adb sideload ota-halcyon_beryl-xxxxx.zip

Troubleshooting​

If you encounter any issues during or after the installation, feel free to ask to our chat group for solutions to common problems.