Skip to main content

POCO X7 Pro / Redmi Turbo 4 (rodin)

info

Device Information​

  • Device: POCO X7 Pro / Redmi Turbo 4 (rodin)
  • Release Date: 2025, January 09 (POCO) / 2025, January 02 (Redmi)
  • Chipset: Mediatek Dimensity 8400 Ultra
  • RAM: 8GB / 12GB / 16GB (Redmi variant)
  • Storage: 256GB / 512GB
  • Battery: 6000 mAh
  • Display: 6.67 inches, AMOLED, HDR10+, 120Hz, 1220x2712 pixels
  • Rear Camera: 50 MP (wide), 8MP (ultrawide)
  • Front Camera: 20 MP (wide)
  • Halcyon Version: Bloom
  • Maintainer: Ido
Get builds

Installation Guide​

caution

Before proceeding, please remove all lockscreen security (PIN, password, pattern, and fingerprint) and ensure you have backed up your data. Keeping any lockscreen credentials active while switching ROMs can cause the fingerprint sensor to stop working, and in many cases this issue cannot be easily recovered. We are not responsible for any malfunction resulting from not following these steps.

Installing Recovery​

  1. Enter fastboot mode by using a key combination Power + Vol Down.
  2. Connect your device to your PC via USB.
  3. Verify that your PC detects the device with fastboot devices.
  4. Flash the recovery image onto your device using fastboot flash vendor_boot vendor_boot.img.
  5. Reboot into recovery mode by typing fastboot reboot in command line and then hold Power + Vol Up to boot to recovery.

Installing ROM​

  1. Download the latest release of Halcyon.
  2. Reboot into recovery mode.
  3. Perform a Format data.
  4. Return to the main menu.
  5. Select Apply update > Apply from ADB.
  6. Now you can start sideloading by this command:
adb sideload ota-halcyon_rodin-xxxxx.zip

Troubleshooting​

If you encounter any issues during or after the installation, feel free to ask to our chat group for solutions to common problems.