Skip to main content

POCO M2 Pro / Redmi Note 9S / Redmi Note 9 Pro / Redmi Note 9 Pro Max / Redmi Note 10 Lite (miatoll)

info

Device Information​

  • Device: POCO M2 Pro / Redmi Note 9S / Redmi Note 9 Pro / Redmi Note 9 Pro Max / Redmi Note 10 Lite (miatoll)
  • Release Date: March 2020
  • Chipset: Qualcomm SM7125 Snapdragon 720G (8 nm)
  • RAM: 4 GB / 6 GB / 8 GB
  • Storage: 64 GB / 128 GB (UFS 2.1)
  • Battery: 5020 mAh, non-removable, 33W fast charge
  • Display: 1080 x 2400 pixels, 20:9 ratio, 6.67 inches, IPS LCD, HDR10
  • Rear Camera: Quad 48 MP (main) + 8 MP (ultrawide) + 5 (macro) + 2 (depth)
  • Front Camera: 16 MP (wide)
  • Halcyon Version: Ursinia
  • Maintainer: RiteshSahany
Get builds

Installation Guide​

caution

Make sure to backup your data before proceeding.

Installing Recovery​

  1. Enter fastboot mode by using a key combination Power + Vol Down.
  2. Connect your device to your PC via USB.
  3. Verify that your PC detects the device with fastboot devices.
  4. Flash the boot image onto your device using fastboot flash recovery recovery.img.
  5. Reboot into recovery mode by typing fastboot reboot recovery in command line or by holding Power + Vol Up.

Installing ROM​

  1. Download the latest release of Halcyon.
  2. Reboot into recovery mode.
  3. Perform a Format data.
  4. Return to the main menu.
  5. Select Apply update > Apply from ADB.
  6. Now you can start sideloading by this command:
adb sideload halcyon_miatoll-xxxxx.zip

Troubleshooting​

If you encounter any issues during or after the installation, feel free to ask to our chat group for solutions to common problems.