Skip to main content

Redmi Note 11S / POCO M4 Pro (fleur)

info

Device Information​

  • Device: Redmi Note 11S / POCO M4 Pro
  • Release Date: 2022, February 28
  • Chipset: MediaTek Helio G96 (MT6781)
  • RAM: 6 GB / 8 GB
  • Storage: 64 GB / 128 GB / 256 GB
  • Battery: 5000 mAh
  • Display: 6.43 inches, AMOLED, FHD+, 90Hz, 1080x2400 pixels
  • Rear Camera: Triple 64 MP (main) + 8 MP (ultrawide) + 2 MP (macro)
  • Front Camera: 16 MP (wide)
  • Halcyon Version: Ursinia, Viola
  • Maintainer: Ido
Get builds Get builds - Beta

Installation Guide​

caution

Make sure to backup your data before proceeding. If you're from 4.14 based ROMs make sure you have flashed latest HyperOS Global firmware first!

Installing Recovery​

  1. Enter fastboot mode by using a key combination Power + Vol Down.
  2. Connect your device to your PC via USB.
  3. Verify that your PC detects the device with fastboot devices.
  4. Flash the boot image onto your device using fastboot flash boot boot.img.
  5. Reboot into recovery mode by typing fastboot reboot recovery in command line or by holding Power + Vol Up.

Installing ROM​

  1. Download the latest release of Halcyon.
  2. Reboot into recovery mode.
  3. Perform a Format data.
  4. Return to the main menu.
  5. Select Apply update > Apply from ADB.
  6. Now you can start sideloading by this command:
adb sideload halcyon_fleur-xxxxx.zip

Troubleshooting​

If you encounter any issues during or after the installation, feel free to ask to our chat group for solutions to common problems.