Skip to main content

POCO F6 / Redmi Turbo 3 (peridot)

info

Device Information​

  • Device: POCO F6 / Redmi Turbo 3 (peridot)
  • Release Date: May 2024
  • Chipset: Qualcomm SM8635 Snapdragon 8s Gen 3 (4 nm)
  • RAM: 8 GB / 12 GB (LPDDR5X)
  • Storage: 256 GB / 512 GB (UFS 4.0)
  • Battery: 5000 mAh, non-removable, 90W fast charge
  • Display: 1220 x 2712 pixels, 20:9 ratio, 6.67 inches, 120 hz, AMOLED
  • Rear Camera: Dual 50 MP (main) + 8 MP (ultrawide)
  • Front Camera: 20 MP (wide)
  • Halcyon Version: Viola
  • Maintainer: Ramshell688
Get builds - Beta

Installation Guide​

caution

Make sure to backup your data before proceeding.

Installing Recovery​

  1. Enter fastboot mode by using a key combination Power + Vol Down.
  2. Connect your device to your PC via USB.
  3. Verify that your PC detects the device with fastboot devices.
  4. Flash the boot image onto your device using fastboot flash recovery recovery.img.
  5. Reboot into recovery mode by typing fastboot reboot recovery in command line or by holding Power + Vol Up.

Installing ROM​

  1. Download the latest release of Halcyon.
  2. Reboot into recovery mode.
  3. Perform a Format data.
  4. Return to the main menu.
  5. Select Apply update > Apply from ADB.
  6. Now you can start sideloading by this command:
adb sideload halcyon_peridot-xxxxx.zip

Troubleshooting​

If you encounter any issues during or after the installation, feel free to ask to our chat group for solutions to common problems.