Skip to main content

POCO F5 / Redmi Note 12 Turbo (marble)

info

Device Information​

  • Device: POCO F5 / Redmi Note 12 Turbo
  • Release Date: 2023, May 09
  • Chipset: Qualcomm Snapdragon® 7+ Gen 2 (SM7475)
  • RAM: 8GB/12GB/16GB (LPDDR5 RAM, UFS 3.1 storage)
  • Storage: 256GB/512GB/1024GB
  • Battery: Non-removable, 5000 mAh
  • Display: 6.67″, 120Hz, 2400x1080 (395 ppi)
  • Rear Camera: 64MP wide angle, 8MP ultra wide-angle, 2MP macro
  • Front Camera: 16MP in-display
  • Halcyon Version: Ursinia, Viola, Bloom
  • Maintainer: Shakib
Get builds

Installation Guide​

caution

Make sure to backup your data before proceeding.

Fastboot package installation​

If you want to install using the Fastboot package, the complete installation guide is available here. Otherwise, you can follow the instructions below to flash via recovery using ADB sideload.

Installing Recovery​

  1. Enter fastboot mode by using a key combination Power + Vol Down.
  2. Connect your device to your PC via USB.
  3. Verify that your PC detects the device with fastboot devices.
  4. Flash the recovery image onto your device using fastboot flash recovery_ab recovery.img.
  5. Reboot into recovery mode by typing fastboot reboot recovery in command line or by holding Power + Vol Up.

Installing ROM​

  1. Download the latest release of Halcyon.
  2. Reboot into recovery mode.
  3. Perform a Format data.
  4. Return to the main menu.
  5. Select Apply update > Apply from ADB.
  6. Now you can start sideloading by this command:
adb sideload ota-halcyon_marble-xxxxx.zip

Troubleshooting​

If you encounter any issues during or after the installation, feel free to ask to our chat group for solutions to common problems.